Application: Mazda Mx5/Miata/Eunos NA (MK1) Chassis '89-'98 | 1.6 B6-ZE Engine | Manual & Automatic Transmissions | RHD & LHD Models
Description:
Note: Some types of coolant are not compatible with silicone hoses. Please read the Important Fitting Notes in the image gallery before buying and fitting silicone hoses.
This high quality reinforced silicone hose kit replaces 15 coolant and breather hoses in the engine bay listed below. The hoses fit all Mx5 MK1 1.6 models.
- Upper Radiator Inlet Hose
- Lower Radiator Outlet to Hard Pipe Hose
- Lower Radiator Hard Pipe to Block Hose
- Heater Matrix Inlet Hose
- Heater Matrix Outlet Hose
- Inlet Manifold to Thermostat Housing Coolant Hose
- ISC to Throttle Body Coolant Hose
- Throttle Body Coolant Hose
- Thermostat Housing Bypass Hose
- Radiator to Expansion Tank Hose
- Expansion Tank Overflow Hose
- Cam Cover to Intake Pipe Breather Hose *
- PCV to Inlet Manifold Hose
- IACV Breather Hose
- Intake Pipe Resonator Hose
* The kit includes the one piece cam cover to intake breather hose found on later models. If you have the earlier model with two hoses and a metal breather pipe running across the front of the engine you can either unbolt the metal pipe and use the longer hose, or cut a section out of the middle of the hose to give you the two shorter hoses and keep the metal pipe. The hose can be cut easily with a stanley knife using a new blade, ensuring you leave enough overlap to clamp the hoses to the metal breather pipe. The optional clamp kit includes two additional clamps for this purpose.
Your details are protected and safe with us.
Application: Mazda Mx5/Miata/Eunos NA (MK1) Chassis '89-'98 | 1.6 B6-ZE Engine | Manual & Automatic Transmissions | RHD & LHD Models
Description:
Note: Some types of coolant are not compatible with silicone hoses. Please read the Important Fitting Notes in the image gallery before buying and fitting silicone hoses.
This high quality reinforced silicone hose kit replaces 15 coolant and breather hoses in the engine bay listed below. The hoses fit all Mx5 MK1 1.6 models.
- Upper Radiator Inlet Hose
- Lower Radiator Outlet to Hard Pipe Hose
- Lower Radiator Hard Pipe to Block Hose
- Heater Matrix Inlet Hose
- Heater Matrix Outlet Hose
- Inlet Manifold to Thermostat Housing Coolant Hose
- ISC to Throttle Body Coolant Hose
- Throttle Body Coolant Hose
- Thermostat Housing Bypass Hose
- Radiator to Expansion Tank Hose
- Expansion Tank Overflow Hose
- Cam Cover to Intake Pipe Breather Hose *
- PCV to Inlet Manifold Hose
- IACV Breather Hose
- Intake Pipe Resonator Hose
* The kit includes the one piece cam cover to intake breather hose found on later models. If you have the earlier model with two hoses and a metal breather pipe running across the front of the engine you can either unbolt the metal pipe and use the longer hose, or cut a section out of the middle of the hose to give you the two shorter hoses and keep the metal pipe. The hose can be cut easily with a stanley knife using a new blade, ensuring you leave enough overlap to clamp the hoses to the metal breather pipe. The optional clamp kit includes two additional clamps for this purpose.
