Tomei Expreme TI Full Titanium Muffler Exhaust System for Subaru WRX/STI Hatchback 08-14 UK/USDM EJ25
MORE POWER, LESS WEIGHT,
DRAMATICALLY CHANGE YOUR WRX/STI.
High quality production, for true competition use without compromise. Only the best Titanium grade materials are used. From the special racing layout design, made as straight as possible, to the high flow silencer. We have poured our knowledge into it all. When you see our EXPREME Ti system, you can then understand that ours is unrivaled.
GR＃(5Dr HB)
USDM
WRX '11-'14/STI '08-'14 EJ25
P/N TB6090-SB02B (Previous P/N440017)
STOCK COMPARISION
The exhaust flow design was the main focus in the pipe design, the best pipe thickness for weight and strength with pipe diameter to suit torque and all power gains throughout the entire power band.
16kg Weight Reduction from stock exhaust!
RACING LAYOUT
When aiming for true performance efficiency, we had chosen to design the exhaust with the least amount of bends as possible. Just like the true purpose built race cars, in a racing layout design, yet to still comply with the stock body design so it can be fitted to any street used vehicles.
A : MAIN SILENCER/ TAIL END
Compared with the stock design, our design is single piping all the way for max weight reduction. We have also focused on the design of the muffler to produce the best exhaust sound without compromising performance.
B : MAIN PIPE
The pipe diameter was chosen for optimum exhaust flow efficiency. For performance use in mind and weigh reduction. Thus the slide joints was made instead of using the conventional flange and gasket design.
C : SUB SILENCER
This sub silencer was designed with a simple structure and minimal size to reduce unwanted noise. Without hindering exhaust gas flow.
Designed For True Performance Use.
・Lightweight (For total balance)
・Optimum Exhaust Flow (To extract the engines full potential,
Will benefit greatly with additonal tuning.)
3 PIECE ASSEMBLY
No flanges were fitted for increased weight savings and for a better finish with the race look secure springs and clamp methods.
Your details are protected and safe with us.
Tomei Expreme TI Full Titanium Muffler Exhaust System for Subaru WRX/STI Hatchback 08-14 UK/USDM EJ25
MORE POWER, LESS WEIGHT,
DRAMATICALLY CHANGE YOUR WRX/STI.
High quality production, for true competition use without compromise. Only the best Titanium grade materials are used. From the special racing layout design, made as straight as possible, to the high flow silencer. We have poured our knowledge into it all. When you see our EXPREME Ti system, you can then understand that ours is unrivaled.
GR＃(5Dr HB)
USDM
WRX '11-'14/STI '08-'14 EJ25
P/N TB6090-SB02B (Previous P/N440017)
STOCK COMPARISION
The exhaust flow design was the main focus in the pipe design, the best pipe thickness for weight and strength with pipe diameter to suit torque and all power gains throughout the entire power band.
16kg Weight Reduction from stock exhaust!
RACING LAYOUT
When aiming for true performance efficiency, we had chosen to design the exhaust with the least amount of bends as possible. Just like the true purpose built race cars, in a racing layout design, yet to still comply with the stock body design so it can be fitted to any street used vehicles.
A : MAIN SILENCER/ TAIL END
Compared with the stock design, our design is single piping all the way for max weight reduction. We have also focused on the design of the muffler to produce the best exhaust sound without compromising performance.
B : MAIN PIPE
The pipe diameter was chosen for optimum exhaust flow efficiency. For performance use in mind and weigh reduction. Thus the slide joints was made instead of using the conventional flange and gasket design.
C : SUB SILENCER
This sub silencer was designed with a simple structure and minimal size to reduce unwanted noise. Without hindering exhaust gas flow.
Designed For True Performance Use.
・Lightweight (For total balance)
・Optimum Exhaust Flow (To extract the engines full potential,
Will benefit greatly with additonal tuning.)
3 PIECE ASSEMBLY
No flanges were fitted for increased weight savings and for a better finish with the race look secure springs and clamp methods.
